Setup
1. Set up the 1288 HD Camera Console according to the instructions provided
in its user manual.
2. Connect the urology camera head to the console.
•
Unscrew the soaking cap from the cable connector if necessary.
•
Align the blue arrow on the cable connector with the blue arrow
on the urology camera-connector port on the front console panel.
•
Push in the connector until it locks in place.
•
(To unplug the urology camera from the control unit, grasp the
knobbed portion of the connector and pull straight out.)
3. Attach an endoscope to the urology camera head.
•
Remove the red dust cap if it is present.
•
Lock the endobody brake by pushing it to the right.
•
Twist the endobody clamp and hold it open.
8