Equipment Setup And Use; Prior To Use; Setup - Stryker F-SFHPBER Manual De Instrucciones

INSTRUCTIONS FOR USE
3

Equipment Setup and Use:

Prior to use:

a. Inspect the product looking for any visible damage or sharp edges that
could be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped
dry prior to each use.

Setup:

Step 1: Place C-prone on
Flex-Frame approximately
12" from chest supports.
Step 2: Push down firmly on
the clamp latch to lock the
Supine Top into place. Pull
outward on the clamp
latch to ensure the clamp
is locked.
Step 3: Place disposable
mask.
Document Number: 80028212
Version: A
Page 12
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E