Setup; Connections - Stryker 0240-031-050 Manual Del Usuario

Setup

Stryker Endoscopy considers instructional training, or inservice, an integral part of this device.
Your local Stryker Endoscopy sales representative will perform at least one inservice at your
convenience to help set up your device and instruct you and your staff on its operation and
maintenance. To schedule an inservice, contact your local Stryker Endoscopy representative after
your device has arrived.

Connections

Video input and output signals are connected to the rear of the display, as illustrated below:
1. Power Connector (24V)
2. DVI
3. HDMI (HDMI 1.4)
4. HDMI 4K (HDMI 2.0)
5. RS-232 communication port
6. SDC device control port
7. ACC (Accessory) POWER
EN-12
1 2 3 4 5 6 7