Rockstar 2500 Ultimate Ergowet Connected Mobile App; Cleaning And Maintenance - cecotec CONGA ROCKSTAR 2500 ULTIMATE ERGOWET CONNECTED Manual De Instrucciones

ENGLISH
Align the mop cloth with the Velcro strips on the water tank and attach it without covering
2.
the wheels. Fig. 15
Replacing the mop
Remove the water tank from the device.
1.
Use your foot to hold the accessory against the ground and pull the vacuum cleaner
2.
upwards until both parts are separated.
Replace the mop and refill the water tank.
3.
Install the water tank again, insert the tank in the lower part of the vacuuming brush head
4.
and press until it is fixed.
Water emission
Fig. 16
- When using this product for the first time, make sure the water tank lid is not fully open.
- When not in use, pay attention to the water emission push button and to the tank lid, as
water leak may occur when the water tank is full.
- To activate the water emission, the water emission push button must be pressed, and to
stop the water emission, the push button must be in the original position, as shown in
figure 16.

6. ROCKSTAR 2500 ULTIMATE ERGOWET CONNECTED MOBILE APP

Download the CECOTEC app.
1.
You must register with your email address, insert the activation code you will receive in
2.
your email address and create a password. If you already have a user account, you can
log in directly.
Press '+' on the main display to add a new device and select the Vacuuming section, where
3.
you will find the Conga RockStar.
Activate the Bluetooth and search your device in the linking list.
4.

7. CLEANING AND MAINTENANCE

- Turn the appliance off, unplug it from the power supply and allow it to cool down before
cleaning it.
- Use a soft, slightly dampened cloth to clean the device's surface.
- Never immerse the device in water or other liquids, do not allow liquids to enter the device.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Do not leave the devicein a place with direct sunlight.
- Do not leave the device in a wet place after cleaning it.
- After the brush has been used for a long time, bristles might start to tangle with hair and
56
other particles. Clean it in order for it to operate correctly again.
Filters and tank cleaning
- To avoid the appliance from overheating and losing suction power, it is suggested to clean
the filters frequently. To make the most of the suction power, it is suggested to clean the
filter after every use.
- The filters shelf life will depend on the accumulated use and the type of particles which are
frequently vacuumed. It is recommended to replace the filters every 6 months.
- To remove the filters (Fig. 17):
Press the dust tank opening button, marked with the word "CLEAN", and pull on the
1.
metallic handle to remove the filtering system.
Once the filtering system is out, turn the metallic handle anticlockwise and you will be
2.
able to remove the high-efficiency filters.
- You can wash the high-efficiency filter with warm water (Fig. 18). However, it is
recommended to vacuum or shake it out, to prevent the filter from getting wet or damp
and affecting the performance of the vacuum cleaner.
- If you decide to wash it, make sure it is completely dry before installing it again on the
device.
- Filters cannot be washed inside a washing machine nor dried with a hair dryer.
- Do not brush the filter.
- To empty the dust tank, press the dust tank lower opening button, open it and empty it.
Fig. 19
Cleaning the Jaliscazo brush
Fig. 20
Move the rotary brush release button with the finger toward the arrow and remove the
1.
cover on the same side of the brush.
Remove one end of the brush as shown on the image.
2.
- It is important to clear and clean all the residues left in the brush rotary axis.
- If you decide to wash the brush, you must air dry all the pieces. Assemble the pieces back
in order to use the brush again.
Watertank cleaning
- To clean the water tank, fill it with clean water, shake it, and empty it.
- The mop is washable; therefore, it is suggested to wash it after every use.
- Replace the cloth after 20-30 uses, depending on the use.
- When the mop cloth is used for a long time, it is possible that the water output is affected.
This can be avoided by cleaning both the mop and water tank regularly.
How to remove the battery
Press the battery release button and remove the battery as shown on the image. Store the
battery in a plastic bag and leave it in a dry place. Fig. 21
CONGA ROCKSTAR 2500 X-TREME ULTIMATE ERGOWET CONNECTED
ENGLISH
57