Handheld Transmitter Lcd - Dogtra Europe 640C Manual De Instrucciones

Ocultar thumbs Ver también para Europe 640C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Charger Info
Manufacturer: HON-KWANG
Manufacturing country: CHINA
Model name: HK-AP-050A100-EU
INPUT: 100~240V~50/60Hz 0.2A / OUTPUT: 5V 1.0A
WARNING
During battery charging, the unit must be close to the
wall outlet and the wall outlet must be easily accessible
for security reasons.
8. THE HANDHELD TRANSMITTER LCD
Turn the LCD backlight on and off with a short press of
the on/off button.
The LCD screen indicates the stimulation level (0-127).
The LCD battery life indicator shows 3 bars at full charge,
2 bars at medium charge and 1 bar when it needs to
be charged. The battery life indicator only specifies
the remaining charge for your transmitter. To find the
remaining charge for your receiver, observe the LED
indicator on the receiver/collar.
52
Green = full charge
Amber = Medium charge
Red = Needs charge
Care for LCD Transmitters in Cold Temperature
In cold temperatures (minus 12 dregrees Celsius or below),
the Liquid Crystal Display (LCD) on your transmitter may
be dim or slow to respond. Wait until the display becomes
visible before selecting any training level. Even though
the LCD screen might be dim or slow to respond when
you push the Nick or Constant button, the transmitter will
still function properly. In the occurrence of extremely cold
weather, the LCD screen might take a moment to respond
causing the intensity level to freeze at that current level.
In this situation, if you turn the rheostat intensity dial,
the level on the screen may not change but the actual
intensity from the receiver/collar will change in agreement
with the dial. In this situation, it is ideal to either wait until
your transmitter is back to working order before emitting
a correction, or while holding the constant button down
slowly turn the Rheostat Intensity Dial while watching
your dog's reaction. Do not turn the Rheostat Intensity
Dial at a rapid increase because the receiver/collar will
emit a static correction based on the level of the Rheostat
Intensity Dial, which might not be correctly reflected on
the LCD screen.
53

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Europe 642c

Tabla de contenido