Dogtra Europe E-FENCE 3500 Manual De Instrucciones página 27

CAUTION
Before you install your E-Fence 3500 wire, contact the utility company to
mark the utility lines on your property before you begin digging. Be sure to
test your wire layout above ground before permanent installation begins.
Carefully choose the areas in which you want to contain your dog. A diagram
may be helpful in predicting unforeseen obstacles. (Please refer to the Common
Boundary Designs)
IMPORTANT
When creating a Front Boundary Only, Fence Front Yard Only, or Front
Boundary with Existing Fence type of containment system a double loop
layout is required. THE TWO PARALLEL WIRES OF THE DOUBLE LOOP MUST
BE 1,80 - 3,00 METERS APART to avoid any signal interference. Single loop
systems must also be kept 1,80 - 3,00 METERS of distance between the wires
as well.
* Please note, the diagrams are not drawn to scale.
The E-Fence 3500 system includes 150 meters of boundary wire and 50 training
flags. Additional flags and wiring can be purchased through the Dogtra
Company. The estimated requirements are as follows :
50
SURFACE Wire (150m/spool)
ha m² Perimeter (m)
0,02ha 200 57
0,04ha 400 80
0,06ha 600 98
0,08ha 800 113
0,1ha 1000 127
0,2ha 2000 180
0,3ha 3000 220
0,4ha 4000 253
0,8ha 8000 358
1ha 10000 400
2ha 20000 566
3ha 30000 693
4ha 40000 800
5ha 50000 895
6ha 60000 980
7ha 70000 1058
8ha 80000 1132
For areas larger than 5 ha, please contact us :
info@dogtra-europe.com or +33 (0) 130 62 65 65
Flags (50/bundle)
#Spools #Flags #Bundles
1 20 1
1 27 1
1 33 1
1 38 1
1 43 1
2 60 2
2 73 2
2 85 2
3 120 3
3 133 3
4 189 4
5 231 5
6 267 6
6 298 6
7 327 7
8 353 8
8 377 8
51