4.
Install wheel assembly into bottom of base (1). Secure the wheels (3) into the wheel brackets (19) using
A
axles (2) and nuts (23).
NOTE
Do not install both bolts into the wheel assembly
at this time.
The front bolt will be installed during strut
assembly in Step 3 of this section.
23
3
Install wheel assembly into bottom of base (1) using bolts (17) and washers (12) through base and into
B
wheel brackets (19) as shown, using only the rear holes. The front holes will be used in a later step.
A.
19
2
23
1
17
12
NOTE
TO INSTALL SECOND PUSHNUT:
• Assemble Pushnut, Wheels, Axle, And Wheel
Bracket As Shown.
• Support Pushnut/Axle From The End With A
Block Of Wood To Install The Second Pushnut Onto
The Axle.
14
Wood Block