Descargar Imprimir esta página

SPALDING M6A92203 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

Insert pole assembly into tank assembly as shown. Secure pole assembly (4,5,6) to tank using pole mounting plate
5.
(50) and bolts (7) as shown. Secure flat end of tank struts (10) to pole using bolt (11), washer (12), and nut (13), as
shown. Do not fully tighten bolt (11) and nut (13).
WARNING!
TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS WARNING COULD RESULT IN
SERIOUS INJURY AND/OR PROPERTY DAMAGE.
Rotate the non-secured angled ends of the struts (10), align base support frame (39) under base (1) and secure
6.
tank struts (10) to the base using bolts (15) and washers (12).
9
12
IMPORTANT!
The Warning Label should be
facing towards the front.
10
61
13
12
61
9
12
16
12
11
10
50
7

Publicidad

loading