Descargar Imprimir esta página

Würth DS 180-P Traducción Del Manual De Instrucciones De Servicio Original página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
GB
Please read and comply with these
instructions prior to the initial opera-
tion of your device.
Retain these instruction manual for
future reference or for subsequent
possessors.
In addition, the general safety instructions
in the enclosed booklet must be followed.
Before using for the first time, ask for a
practical demonstration.
Special Safety Instructions
Wear safety goggles and
hearing protection.
Wear light respiratory
protection and a hard hat.
Before carrying out any work on
the device, disconnect it from the
power supply.
Be careful of hidden electrical lines
or gas and water pipes. Check the
working area, e.g., with a metal detector.
Before commencing work, the PRCD protective
switch must be checked for proper functioning.
Before commencing work consult the responsi-
ble structural engineers, architects or site super-
vision about any planned borings, especially
when cutting through reinforcing steel.
The machine may only be operated using a
power supply with protection earthing accord-
ing to the regulations.
The machine may not be operated by persons
under the age of 16 years.
The drill stand must always be mounted firmly
and must not be able to move during drilling.
12
For your safety
In case you do not adhere to this instruction manual
and the safety instructions, this may result in dam-
ages on the device and cause dangerous situations
for the operator and other people. In case of trans-
port damage inform vendor immediately.
Safety instructions
Only mount the drill stand on an even, firm and
smooth surface using the vacuum pump.
These must be in perfect condition.
When drilling "over" head always secure the
drill stand with the assembly.
Prevent the drilling core from falling.
Use only original Würth parts and
accessories.
WARNING - Prior to the first
start-up, it is definitely necessa-
ry to read the Safety instruc-
tions!
When carrying out
"over" head wet core
drilling, a water collect-
ing ring and water suc-
tion are always to be
used.

Publicidad

loading

Este manual también es adecuado para:

Ds 180-t5709 116 015709 116 02