Publicidad
Step 42
å
To insert the small drawers into your unit, tip the front of the drawer down and drop the rollers on the drawers behind the
rollers on the unit. Lift the front of the drawers up and slide them into the unit.
å
To insert large drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way
in, then it will slide in and out easier.Repeat this step to insert the KEYBOARD SHELF (Q).
å
Center a SCREW COVER (21P) over the head of each SCREW and a CAM COVER (92P) onto each visible HIDDEN CAM
then gently tap them in with your hammer
Page 48
This drawer must have
the Z-LOCK BRACKET.
Place the roller on the SLIDE
behind the roller on the RAIL.
Q
21P
(6 used)
To cover screws
426914
To cover HIDDEN CAMS
(6 used)
92P
www.sauder.com/service
Publicidad
