Publicidad
Step 28
å
Fasten two METAL BRACKETS (4G) to the SIDE BASES (P).
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the BRACKETS are even with the long
edges of the BASES.
å
Fasten the SIDE BASES (P) to the BRACKETS on the
RIGHT BOTTOM (J). Use ten BLACK 9/16" LARGE HEAD
SCREWS (1S).
The edges of the
BRACKETS should be
even with the short
edge of the BASES.
P
Page 34
BLACK 9/16" LARGE HEAD SCREW
(12 used in this step)
P
J
426914
P
1S
The edges of the
BRACKETS should be
even with the short
edge of the BASES.
4G
P
www.sauder.com/service
Publicidad
