Publicidad
Step 39
å
Insert a SLIDE CAM (10A) into the LARGE DRAWER
SIDES (D87 and D88).
å
Fasten the EXTENSION SLIDES (40MC) to the LARGE
DRAWER
SIDES (D87 and D88). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible
through the slotted hole in the SLIDE.
3
4
BLACK 9/16" LARGE HEAD SCREW
(2 used in this step)
www.sauder.com/service
Open end
10A
1
2
1S
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
D88
W
3S
426914
If you're doing this to
help a friend, don't
leave without a bite.
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D87
2
3
4
Drawer Slide
Center the screw in the oval hole.
7
Open end
1
Page 45
Publicidad
