Publicidad
Step 37
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D136 and D130).
å
Fasten the DRAWER RIGHT (40CC) to the SMALL RIGHT DRAWER SIDE (D130) and the DRAWER LEFT (40CD) to the
SMALL LEFT DRAWER SIDE (D136). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (189K) to the DRAWER FRONT (U). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Repeat this step for the other small drawer.
3
4
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
www.sauder.com/service
Roller end
1
2
D136
189K
U
1S
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
10A
D130
4
3S
426914
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
(4 used)
Roller end
1
2
3
Drawer Slide
Center the screw in the oval hole.
5
Page 43
Publicidad
