Publicidad
Step 34
å
Separate the KEYBOARD SLIDE (Z) from the KEYBOARD RAILS (X and Y) as shown in the upper view. Be prepared, the parts are greasy.
å
You have the option of fastening your KEYBOARD SHELF to the center, left side, or right side of your L-Desk. Shown below
are the 3 options.
å
Keyboard Centered: Fasten the KEYBOARD RAILS (X and Y) to the TOPS (C and D). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Keyboard Right: Fasten the KEYBOARD RAILS (X and Y) to the TOPS (C and D). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Keyboard Left: Fasten the KEYBOARD RAILS (X and Y) to the TOP (C). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
BLACK 9/16" LARGE HEAD SCREW
(4 used for the KEYBOARD RAILS)
Y
Open end
facing out
C
Keyboard to Right
Page 40
Z
Push the metal release in and pull the SLIDE from the RAIL.
1S
When fastening
to the TOPS, be
sure the flanges
of the RAILS are
facing away from
each other..
X
D
X
C
Keyboard to Left
The RAILS fasten
to the TOP (C)
only in this option
426914
Y
and
Keyboard
Centered
D
C
www.sauder.com/service
Publicidad
