Össur ROM Walker Manual De Instrucciones página 3

Warning: The patient should immediately contact a healthcare professional:
• If there is a change or loss in device functionality, or if the device shows
signs of damage or wear hindering its normal functions.
• If any pain, skin irritation, or unusual reaction occurs with the use of the
device.
1.Fitting Instruction
1) Place the foot and leg in the foam liner and fix them snugly.
2) Optional: If necessary, insert a pad kit between the frame and the
softgood.
3) Put the foot in the walker frame. Align the center of the shaft of the ankle
with the position of the support. Remove the cover of the support and
gently press it to fit the foam liner.
4) Tighten and secure the straps in the order shown.
2.How to adjust the compression by the air chamber (if
using Air version)
1) Inflate by pushing the pump. Repeat until proper compression is
obtained.
2) To deflate, turn the valve clockwise. WARNING: To prevent breakage, do
not turn the valve too much.
3.How to set the ROM hinge
3) Turn the opening of the cover so that the stop pin can be operated.
4) Adjust the stop pin so that the setting of the operating range becomes
appropriate.
5) When finished, turn the cover, and close it.
Disposal
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
Liability
Elife does not assume liability, if the device is not maintained as instructed
by the instructions for use, assembled with components from other
manufacturers, or used outside of recommended use condition, application,
or environment.
�