Dust Extraction; Working With The Machine; Service And Maintenance - Festool ETS EC 150/3 EQ Manual De Instrucciones Original

In the case of a weakening adhesive effect of
the StickFix surface, the sanding pad acces-
sories, in particular those which are not yet touch-
ing the workpiece, may come loose from the sand-
ing pad and cause injuries. Replace the sanding
pad!
7.6

Dust extraction

WARNING
Dust hazard
Dust can be hazardous to health. Always work

with a dust extractor.
Always read applicable national regulations be-

fore extracting hazardous dust.
The power tool does not have its own extractor unit.
At the extractor connector [1-5], a Festool mobile
dust extractor with an extraction hose diameter of
27 mm should be connected.
Recommendation: Use an antistatic suction hose.
This helps reduce the electric charge.
8

Working with the machine

WARNING
Risk of injury
Always secure the workpiece in such a manner

that it cannot move while being machined.
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Hold the machine with two hands, one on the mo-
tor housing and one on the gear head.
For sanding, we recommend the following settings
for the adjusting wheel [1-2]:
Sanding work
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered surface
prior to paintwork
– Intermediate sanding of paintwork on sur-
faces
Sanding work
– Sanding thinly applied undercoat
– Sanding wood with sanding cloth
– Edge breaking on wooden parts
– Smoothing primed wooden surfaces
– Sanding solid wood and veneered edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at edg-
es
– Light sanding of natural wood windows
using sanding cloth
– Smoothing wooden surfaces using sand-
ing cloth before staining
– Rubbing or removing excess limestone
residue using sanding cloth
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window rebate us-
ing sanding cloth
– Sanding stained edges
– Sanding of thermoplastics
9
Risk of injury, electric shock
Always disconnect the mains plug from the

socket before performing maintenance work on
the machine!
All maintenance and repair work which requires

the motor housing to be opened must only be
carried out by an authorised service workshop.
Adjusting
wheel set-
ting
EKAT
5 - 6
2
1
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of any obstruction.

Service and maintenance

WARNING
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Only use original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
ETS EC 150
GB
Adjusting
wheel set-
ting
4 - 5
3 - 4
2 - 3
1 - 2
15