Items for both CAM ERA and PLAY modes
DISK TOOL <FORM AT/ DISK COPY>
•Select FORMAT to format the floppy disk loaded in the camera.
•Select DISK COPY to copy all data stored in a floppy disk to
another.
To copy all data stored in a floppy disk to another
1
Select " DISK COPY" , t hen " OK" .
"FILE ACCESS" will be displayed.
2
When " CHANGE FLOPPY DISK" is displayed, eject t he
f loppy disk.
3
When " INSERT FLOPPY DISK" is displayed, insert
anot her disk.
"DISK ACCESS" will be displayed.
4
Once copying is com plet ed, t he m essage " COM PLETE"
is displayed.
Notes
• In the middle of the above steps from 1 through 4, turn off the camera.
• Formatting erases all information on the floppy disk, and with copying disk,
all information saved on the recipient floppy disk are erased to be replaced
by newly written data including the protected image data. Check the
contents of the disk before formatting and copying disk.
• Be sure that the battery is fully charged when formatting and copying a
floppy disk. Formatting and copying takes about 1 minutes maximum.
• Be sure to use the formatted floppy disk to carry out DISK COPY.
BEEP <ON* / OFF>
•Normally select ON.
•Select OFF to turn the beep sound off.
CLOCK SET
Select this item to set the date and time. See page 13.
Downloaded from:
https://www.usersmanualguide.com/
29-EN