Symptom
Zoom does not work.
You cannot play back the
images.
You cannot delete an
image.
The power turns off
automatically.
Downloaded from:
Cause and/ or Solution
• Panfocus mode in PROGRAM AE is working.
n Cansel it.
• PLAY/CAMERA is not set to PLAY.
n Set it to PLAY. (p. 18)
• The battery is dead.
n Use a charged battery pack.
• The image is protected.
n Cancel the protection of the image. (p. 26)
• If you leave the camera inactive in CAMERA
mode for about 3 minutes while the power is on,
it turns off automatically to prevent wearing
down the battery.
n Turn the power on.
https://www.usersmanualguide.com/
37-EN