Heiniger ORION Instrucciones De Manejo Originales página 28

6.1.2 Charge battery
Fig. 11
Fig. 12
6.1.3 Fitting the clipper head
Fig. 13
Fig. 14
Fig. 15
12
1. Check the contacts of the clipper (1) and the battery (2)
for foreign particles and contamination.
2. Make sure that the clipper's switch lever is in the OFF
position ("0") (Fig. 4).
3. Insert the battery (2) in the clipper (3), until the interlock
battery (1) is engaged on both sides.
1. If the blade hinge (2) is accidentally closed, lift the
latter up using a screwdriver (1) while simultaneously
pressing the blade interlock.
2. Fit the clipper head (1) on the open blade hinge (2).
3. Fold the clipper head (2) by applying light pressure
onto the clipper (1) when the device is switched on.
Translation of the original instructions / Hair clippers