Publicidad
Idiomas disponibles
Idiomas disponibles
EN
In order to ensure adequate ventilation, the back panel of the cabinet unit must be
removed. Installing the oven so that it rests on two strips of wood is preferable. If
the oven rests on a continuous, flat surface, there must be an aperture of at least
45x560 mm.
The panels of the adjacent cabinets must be made of heat resistant material. In
particular, cabinets with a veneer exterior must be assembled with glues which
can withstand temperature of up to 100℃
In compliance with current safety standards, contact with the electrical parts of the
oven must not be possible once it has been installed.
All parts which ensure the safe operation of the appliance must be removable only
with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by
inserting the 4 metal screws into the 4 holes located on the perimeter of the
frame.
39
Publicidad
