•
Machinery Directive (2006/42/EC)
Standards used: EN 809:1998 + A1:2009.
•
EMC Directive (2014/30/EU)
Standards used: EN 61326-1:2013, EN
61000-6-2:2005 and EN 61000-6-
3:2007+A1:2011.
Applies only to products equipped with water-in-oil
sensor, vibration sensor or internal SM 113.
•
RoHS Directives (2011/65/EU and 2015/863/EU)
Standards used: EN IEC 63000:2018.
•
ATEX directive (2014/34/EU)
Applies only to products intended for use in
potentially explosive environments,
For Fr 72: II 2 G, Ex db eb h mb IIB T3 or T4 Gb.
For Fr 74-78: II 2G Ex db IIB T3 or T4 Gb, and
equipped with the separate ATEX approval plate
and EU-type examination certificate.
For Fr 74-78, the Ex h IIB T4 Gb marked approval
is based on EN ISO 80079-36:2016, EN ISO
80079-37:2016.
Non-electrical self-declaration made by Grundfos
according to the above-listed standards is
retained by FM Approvals Europe Ltd., No 2809,
Dublin, Ireland, under reference number:
PR451461.
For further information, see below.
Certificate
Range
No
Baseefa
Fr 72
07ATEX010
2X
FM18ATEX
Fr 74-78
0024X
Fr 72: SGS Fimko Oy. No
0598. Helsinki, Finland
Notified body for EU-
Type examination cer-
Fr 74-78: FM Approvals Eu-
tificate:
rope Limited; No 2809. Dub-
lin, Ireland
DEKRA Certification B.V. No
Notified body for pro-
0344, Meaner 1051, 6825
duction:
MJ Arnhem, The Nether-
lands
Grundfos Holding A/S Poul
Manufacturer:
Due Jensen Vej 7, Dk-8850
Bjerringbro, Denmark
1102
Standards used
EN IEC 60079-0:2018,
EN 60079-1:2014, EN
ISO 80079-36:2016, EN
ISO 80079-37:2016
EN IEC 60079-0:2018,
EN 60079-1:2014, EN
60529:1991 +A1:2000
+A2:2013
This EC/EU declaration of conformity is only valid
when published as part of the Grundfos installation
and operating instructions (publication
number 96604379).
th
Székesfehérvár, 30
of April 2021
Róbert Kis
Technical Product Owner
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EC/EU declaration of
conformity.