Descargar Imprimir esta página

mspa TRIBECA F-TR062W Manual Del Propietário página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Water Treatment:
It is good practice with an existing spa to keep all air jets open and valves closed to allow chemically treated water to flush
through all pipework.
Always follow the chemical manufacturer's instructions and health and hazard warnings.
Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each chemical before
adding it to the water.
Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you
usually use chlorine-based products and if you want to switch to bromine-based products or vice versa, it is essential that you
change the spa water first.
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.
Do not overuse chemicals or use concentrated chlorine. This can damage the spa tub and cause a potential hazard to your
skin. Improper chemical use will void the warranty.
Your spa comes with a standard chemical dispenser: This dispenser only applies to 1" tablet.
Do not pour liquid or granules into the dispenser.
NOTE:Remove the chemical dispenser from spa when the spa is in use.
Spa Drainage
2
Cleaning the Spa Tub
If dirt is visible in the water or if the water becomes cloudy and the correct water chemistry does not clear it up, change the
water and clean the spa tub. See the "Spa tub drainage" section on how to drain the spa. While empty, clean and/or replace the
filter cartridge. Use a sponge and mild soap solution to wipe away any soil or stains on the inside of the spa wall. Rinse
thoroughly before refilling with clean water.
IMPORTANT: Do not use steel wool, hard brushes or abrasive cleaners.
FLOATING DISPENSER
DRAINAGE, CLEANING AND STORAGE
1
BUBBLE
DOWN
15
min.
14

Publicidad

loading