Fronius Symo 10.0-3 208-240 Manual De Instrucciones página 30

-
-
-
General Menu
1
Item Settings
2
3
The available settings are displayed:
4
5
The currently selected entry is dis-
played.
Application Ex-
ample: Setting
the Feed-In Tar-
iff
30
the inverter switches from any item within the menu level to the 'NOW' menu
(exception: 'Standby' setup menu),
the display illumination turns off, unless the illumination has been set to ON
in the display setting (see Display Settings - Illumination).
The power being fed in is shown or the current state code is displayed.
Access the desired menu
Use the 'Up' and 'Down' keys to select the desired entry
Press the "Enter" key
Use the 'Up' and 'Down' keys to
select the desired setting
Press the 'Enter' key to save and
apply the selection.
Press the 'Esc' key to exit without
saving.
The first digit of a value to be set
flashes:
Use the "Up" and "Down" keys to
4
select a value for the first digit
5 Press the "Enter" key
The second digit of the value flashes.
Repeat steps 4 and 5 until...
6
the entire value flashes.
Press the "Enter" key
7
Repeat steps 4 - 6 for units or
8
other values to be set until the
unit or value flashes.
Press the 'Enter' key to save and
9
apply the changes.
Press the 'Esc' key to exit without
saving.
The currently selected entry is dis-
played.
Select the 'Energy yield' setup menu
1
entry
2 Press the 'Enter' key