Fronius Symo 10.0-3 208-240 Manual De Instrucciones página 47

The Basic menu
Accessing the
Basic Menu
The Basic menu is displayed.
7
8
9
Basic Menu
The Basic menu contains the following parameters important for the installa-
Entries
tion and operation of the inverter:
MPP Tracker 1 / MPP Tracker 2
-
A c c e s s C o d e
Use the 'plus' or 'minus' keys
Press the 'Enter' key
Press the 'Esc' key
MPP Tracker 2: ON / OFF (for MultiMPP Tracker devices only, except
Fronius Symo 15.0-3 208)
1 Press the 'Menu' key
The menu level is displayed.
Press the unassigned 'Menu/Esc' key
2
5 times
In the "CODE" menu, the "Access Code" is
displayed; the first digit flashes.
Enter code 22742: Use the 'plus' or
3
'minus' keys
of the code
Press the 'Enter' key
4
The second digit flashes.
Repeat steps 3 and 4 for the second,
5
third, fourth, and fifth digit of the code
until...
the set code flashes.
6 Press the 'Enter' key
to select the desired entry
to edit the selected entry
to select the first digit
47