4. Select the patient.
5. Select the image or scan to be reviewed.
6. Adjust the study layout and views as required.
7. Compare results across studies if required.
Note
Detailed instructions can be found in the application help files.
3.3.3 Exiting the review software
To leave OptosAdvance, select
If you are using
Vantage
applications, close all applications.
3.4 Manage the system
To ensure continuous and efficient operation, you should be familiar with additional features of the system.
Access to the Administration functions is restricted to users with administrative privileges.
3.4.1 Managing user details
You are responsible for the security of user accounts and the maintenance of password
security.
CAUTION
User accounts are managed in
The ability to create a user account is restricted to System Administrators.
3.4.1.1 How to create user accounts for use on the scan head
User accounts can not be created on the scan head. User accounts can only be created using the
software on the image server. For more details, see How to create user accounts on the image server below .
3.4.1.2 How to create user accounts on the image server
Create user accounts with
1. Login to OptosAdvance.
2. Select
Settings
.
3. Select
User Management > Accounts
4. Select
Add
.
5. Enter the details for the new user and select the privileges to be assigned to them.
6. Select
Save
.
Create user accounts with
Vantage
If you are using
applications the ability to create a user account is restricted to Administrators.
Administrators should use the
1. Select
Users > Manage Users
2. Select
New User
.
3. Enter the details for the new user and select the privileges to be assigned to them.
4. Select
OK
.
Part Number: G102748/9GCA
Copyright 2017, Optos plc. All rights reserved.
Logoff
.
OptosAdvance
or
Vantage Admin
OptosAdvance
.
Vantage Admin
Vantage Admin
application to create, change or make the user account inactive.
.
software that runs on the image server.
Chapter 3 - How to...
Vantage Admin
Page 39 of 65
English