Optos Daytona P200T Guia Del Usuario página 43

3.4.8.2 Warranty
The details of your warranty are included in your contract.
3.4.8.3 Cleaning
Wear powder-free gloves at all times when cleaning the device including the scan head
and main mirror. If the gloves become contaminated they must be replaced immediately.
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see Cleaning before each patient on the next
page.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.
Improper cleaning methods or use of inappropriate cleaning and disinfecting agents can
result in the following:
l
l
l
Always follow the cleaning and disinfecting agents' manufacturer's instructions and
precautions; for storage, method of application, protective gloves, shelf life and disposal
CAUTION
to help assure effective and safe use of the product.
Do
NOT
scan head. Always allow cleaned areas to air-dry.
Do
NOT
the manufacturer.
Do
NOT
Do
NOT
If you believe cleaning sprays or liquids have got into the equipment, disconnect the
power supply and have the equipment checked by Optos qualified service personnel.
Do
NOT
Do
NOT
General cleaning
Be careful
CAUTION
The equipment should be kept clean and dust free.
Logout, shut down and power off the device before cleaning the outer casing of the scan head.
l
Use a soft, slightly damp cloth to clean the plastic surfaces.
l
Ensure debris does
l
Use a glass-cleaning agent to clean the PC monitor and touch screen.
l
Part Number: G102748/9GCA
Copyright 2017, Optos plc. All rights reserved.
Damaged equipment
Poor imaging performance
Increased risk of electric shock
use lint cloths, tissues, or other materials that may create dust, on or near the
use harsh detergent, abrasive cleaners or solvents that are
expose equipment parts to steam or sterilizers as this will damage the device.
allow liquids to get into the equipment.
let the cleaning wipes come into contact with the inside of the instrument.
use the equipment until you have confirmed it is safe to use.
to damage the scan head covers when cleaning.
NOT
fall inside the device.
NOT
Chapter 3 - How to...
recommended by
NOT
Page 43 of 65
English