Amprobe WT-70 Manual De Uso página 10

Hold Function
To freeze the current readings while in normal measurement mode. To hold the
readings, press "HOLD" key in measurement mode, "HLD" appears on the display.
To release the holding value, press "HOLD" key again. (Fig.2)
Fig. 2
Memory Record
The meter can store 99 point mV records. To record:
1. In any measurement or HOLD mode, press "MEM" key to save data.
2. Memory number & measured value will flash then return to measurement
mode. (Fig. 3). New data can not be saved if the memory is full. To continuously
save new memory, it is needed to clear up existing 99 memories.
Fig. 3
4