Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Connect the terminated USB Maintenance cable on holder's RS232 serial
communication connector.
2.
Connect the other end of the USB Maintenance cable on the PC USB connector.
3.
Check connection status in the computer.
4.
To disconnect, unplug the USB Maintenance cable on holder side and PC side.
7
Troubleshooting
This section provides information to perform a first troubleshooting of the holder.
INFORMATION
For additional information about issues and troubleshooting please refer to
pump Technical Manual or contact your Fresenius Kabi sales representative.
Issue descriptions
Power cable cannot be
connected or removed
from holder
Mains supply light
indicator do not work
The holder cannot be
installed on the position
Nurse Call cable cannot
be connected or
removed from holder
The Nurse Call system
does not replicate pump
alarms
PDMS or USB
connection is not
functional
Recommended actions
Check the power cable inlet on holder
⚫
Check the power cable connector
⚫
Consult technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
Check the power cable connection
⚫
Check the power cable
⚫
Consult technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
Check the installed position
⚫
Check the pole clamp
⚫
Consult technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
Check cable connector
⚫
Consult pump technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
Check Nurse Call cable connection
⚫
Check holder is connected to the mains power supply
⚫
Check pump and holder connectors
⚫
Consult pump technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
Check the communication cable connection
⚫
Check the communication cable
⚫
Check holder is connected to the mains power supply
⚫
Check pump and holder connectors
⚫
Consult pump technical manual
⚫
Contact your Fresenius Kabi sales representative
⚫
13
Publicidad
