Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for preferring this Franke product. We recommend you to carefully read the
warnings and recommendations in the user manual before using the product. This way, you
can efficiently use and keep the product for a longer time.
This appliance must be installed in well-ventilated areas in accordance with the
applicable legislation. Please read the instructions before installing or using the
product. Keep this user manual in a safe place for future use.
Use
Igniting the burners
On these models, the ignition mechanism and the safety device are placed together on the
button.
Apply the following steps to ignite the burner.
1. Turn the pre-selected button (knob).
2. Keep it pressed for ¾ seconds to ignite the gas coming out of the burner with sparks and to
heat the thermocouple (thermal - coupler).
3. Release the button after ¾ seconds and turn the button anti-clockwise to adjust the flame
as you wish. If the flame goes off, turn the button to off position and repeat the same process.
Using the flames
To save on gas and get the best results, we recommend you to use pots suitable to the
diameter of the burners in order to prevent the flames from reaching the sides of the pot.
For burners near the buttons, please do not use pots with larger diameters than the indicated
values to prevent the buttons from overheating.
Round Point
Igniter Icon
Large Flame
Small Flame
1
Tap off
Igniter
Maximum Capacity
Minimum Capacity
Publicidad
