Publicidad
Idiomas disponibles
Idiomas disponibles
90- GLASS
Connecting the gas pipe
Connect the product to the gas pipe in accordance with the applicable laws and only after
making the necessary adjustments for this type of gas-powered appliances. Otherwise, apply
the steps described in paragraph "replacing the injectors". For supplying with liquid gas, use
pressure controllers in accordance with the applicable laws.
Pipe
Ventilating the area
As per the applicable rules/laws, ensure that there are holes directed towards the outer
environment or a ventilating duct that provides proper air flow.
Make sure that the holes:
1. Have a passage section of at least 100 cm
2. Cannot be obstructed either from the inside or from the outside;
3. Do not have any guards to block air passage;
4. Are high enough not to force the discharge of combustion products.
If the holes are on the wall of an adjoining room, the said room must be directly ventilated and
it must not be:
Gasket
Figure 2
90- INOX
Figure 3
Fit the gasket, which is provided to ensure that the
gas pipe is fitted tightly. You must observe the
applicable rules regarding gas installations. After
making the connection, check with soapy water if
there is any leakage.
2
;
12
Publicidad
