Publicidad
Idiomas disponibles
Idiomas disponibles
Suitable pot diameters
Burner
Small Burner
Medium Burner
Large Burner
Wok Burner
Hot plate
Correct positioning of the burner caps
Grills and burner caps must be positioned correctly for the hob to operate properly. (Figure 1)
Ignition pipe and parts of the burner that is related to the ignition function must especially be
very well positioned on the determined place.
Please ensure that the flame is blue and there is no noise. If the flame is yellow or there is
noise during the first ignition, turn off the hob and check that the burners are fully seated.
Please consult the authorised service provider if there is no change in the situation.
Fire fighting device (FFD)
All burners on your hob are equipped with a flame failure device against the risk of going out
for any reason (flood, wind etc.). If the flame goes out when the burner knob is turned on, this
system shuts off the gas supplied to the burner, preventing the ambient from filling with gas.
When the burner is shut off for safety reasons, turn the hob's burner knob to the off position
Pot diameters ø
From ø 12 ø16
From ø14
ø20
From ø18
ø24
From ø22
ø26
From ø14
ø18
CORRECT
Figure 1
INCORRECT
2
Publicidad
