Peg-Perego fumagalli ypsi Instrucciones De Uso página 24

that the child is kept away
when unfolding and folding this
product
_ WARNING Do not let the child
play with this product.
This product is not a toy.
_ WARNING Never leave the child
unattended.
_ Be careful not to hurt the child
when adjusting the mechanisms
(handlebar, backrest ... ).
_ Do not use the product near to
stairs or steps, heat sources, naked
flames or dangerous objects within
reach of the child.
_ Only replacement parts supplied or
recommended by the manufacturer/
distributor shall be used.
_ WARNING This product is not
suitable for running or skating.
_ WARNING Do not add any mattress
not approved by the manufacturer.
_ Do not use accessories which are
not approved by the manufacturer.
Ypsi (Chassis + Seat):
This product is suitable for children
from 6 months to 6 years or 30 kg in
weight, whichever comes first.
For babies weighing more than
15 kg, direct and use the seat
exclusively following the direction of
travel.
_ WARNING: This seat unit is not
suitable for children under 6
months.
_ WARNING: Always use the
restraint system.
Always use the containment
belts that also provide postural
support.
_ The front bar has not been
designed to support the child's
weight; the front bar has not been
designed to lift the seat with the
child's weight. The front bar does
not replace the seat belt.
_ WARNING: do not use the rain
canopy (if present) in interiors and
check the child is not too hot; do
not leave near sources of heat and
keep away from cigarettes. The
rain canopy must not be used on a
stroller without a hood or parasol it
can attach to. Use the rain canopy
only under adult supervision. Check
the rain canopy does not interfere
with any moving mechanism in the
chassis or stroller. Remove the rain
canopy before folding the chassis or
stroller.
"Intended use: YPSI is designed for
children with special needs (GMFCS
level I to V, up 30 kg in weight), who
need a foldable, easy-to-manage
stroller for travelling short distances."
Declaration of conformity: This
product complies with the
requirements of Regulation (EU)
2017/745 on medical devices. If
the product is modified, used in
combination with another product
made by another manufacturer or
used with non-original accessories
or replacement parts, the CE
marking must be removed.
The images referring to the textile details may
differ from the collection purchased.
INSTRUCTIONS
YPSI CHASSIS
1 OPENING: Before opening the frame, if present,
remove (without using blades) all die-cut cardboard.
WARNING:
_ DO NOT PULL OR FORCE THE FASTENER BEYOND ITS
LIMIT.
_ DO NOT USE THE FASTENER AS A HANDLE BAR FOR
TRANSPORT OR TO CARRY WEIGHTS.
DO NOT HANG BAGS OR OTHER ACCESSORIES ON
THIS ELEMENT.
Press the side fastener downwards, grip the upper
ends of the handle bar and rotate them towards
you until the chassis has opened completely (fig_a).
Opened chassis (fig_b). The chassis is opened
correctly when you hear a click, which corresponds
to the handle bar frame attaching - please look at the
picture.
2 FITTING THE WHEELS: slot the rear wheel crosspiece
onto the uprights (fig_a), ensuring that it is facing the
right way, then attach the rear wheels until they click
into place (fig_b) . To assemble the front wheels, fit
them into the slots until they lock into place (fig_c).
3 FITTING THE HANDLE BAR: insert the handlebar into
the frame (fig_a) as shown in the picture. For the
attachment to be complete, press the two buttons
on the side of the handle bar (fig_b) and press the
handle bar until you hear it click (fig_c).
4 BASKET ASSEMBLY: Slip the basket flap into the slot
along the front bar of the chassis (Fig_a).
Fasten the basket eyelets to the buttons on each side
- 24 -