Basic Operations - JVC KD-LX50 Manual De Instrucciones

BASIC OPERATIONS

1
1
2
Notes:
* If a CD is not in the loading slot, you cannot select CD as the source to play.
** Without connecting the CD changer, you cannot select it as the source to play.
3
4
Adjust the sound as you want (see pages 17 – 21).
To drop the volume in a moment
Press SOURCE (ATT) for more than 1 second while listening to any source. "ATT" starts
flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button for more than 1 second again.
To turn off the power
Press and hold OFF/ 0 until "SEE YOU" appears on the display.
6
Turn on the power.
The display illuminates and the control panel comes out.
Select the source.
Each time you press the button, the source changes as follows:
= Tuner (FM or AM) = CD* = CD changer** = External component
= (back to the beginning)
To operate the tuner, see pages 7 – 11.
To operate the CD player, see pages 12 – 16.
To operate the external component connected to the LINE IN plugs,
see page 53.
To operate the CD changer, see pages 54 – 57.
Adjust the volume.
3
2
Notes:
• When you use this unit for the
first time, set the built-in
clock correctly, see page 40.
• To operate the v oice
recognition system, see
pages 22 to 39.
Volume level meter