Storing Your Own Sound Adjustments; To Reset To The Factory Settings - JVC KD-LX50 Manual De Instrucciones

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 19) to your preference and
store your own adjustments in memory.
3-
2
1
2
3
1 2
4
5
Repeat the same procedure to adjust other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 19.
3- 2,4 1
1
Light "MODE" on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while "MODE"
is still on the display. Otherwise, the setting will be canceled.
Select the sound mode you want.
For details, see page 19.
To adjust the bass or treble level
1 Select "BAS" or "TRE."
2 Adjust the bass or treble level.
To turn on or off the BBE
See page 18.
Press and hold SCM until the sound mode you have
selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
3
II function
21