SPIT 218 Lithium Manual Original página 20

English
20
Operating elements
I Rotational direction switch
II On/Off control switch
III Battery release button
IV Button for charge level indicator
EN
V Button for lighting (On/Off)
VI Bit
VII Adjustment ring for depth stop
Device components
1 Ventilation slots
2 Battery
3 Battery charge level indicator
4 Battery contacts
5 Battery cap
6 LED lighting
7 Belt clipholder
8 Retaining pin
9 Bit holder (Option)
10 Depth stop
Battery charger
11 Battery charger
12 LED charge level indicator
13 Battery charging compartment
Contents
See packaging
Specifi ed conditions of use
The device is designed exclusively for driving screws
into and loosening screws from plasterboard and
chipboard on wood and sheet steel substructures.
Requirements for the user
The tool must only be operated, maintained and
serviced by authorised trained personnel. The per-
sonnel must be made aware of the relevant dangers.
Technical data
Rated voltage of battery in V DC
Capacity in Ah
1. n
in rpm
= No-load speed (1st gear)
0
Noise levels
L
= A-rated sound pressure level
pA
L = A-rated sound power level
wA
K = Measurement uncertainty value
The noise level can exceed 85 dB(A)
during operation.
Wear hearing protection!
Triaxial vibration emission level deter-
mined in accordance with EN 60745.
K = Measurement uncertainty value
The vibration emission level given
in this information sheet has been
measured in accordance with a stan-
dardised test given in EN 60745 and
may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information
sheet. This could lead to underestimation of vibration
when the tool is used regularly in such a manner.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given
period of work should also take into account the
times when the tool is switched off and when it is
running but not actually when doing the job.
This may signifi cantly reduce the exposure level
over the total working period. Identify additional
safety measures to protect the operator from the
effects of vibration such as: maintain the tool and
accessories, keep the hands warm, organisation
of work patterns.
Fitting screws in wood - max. ø in mm
Weight in kg
Battery
Rated voltage of battery in V DC
Capacity in Ah
Battery with lithium-ion technology
Spit 218 Lithium