Publicidad
Idiomas disponibles
Idiomas disponibles
MENZER VC 760
INDUSTRIAL VACUUM CLEANER
Translation of the original operating instructions
Original instructions
Dear customer,
By purchasing the MENZER VC 760 Industrial Vacuum Cleaner you have selected a product of the high-
est quality. We would hereby like to express our gratitude for the trust you have shown in us and our tools.
Before using your power tool for the first time, please take the time to read the operating and safety instruc-
tions on the following pages. Close observance of the information contained here will ensure an optimum
result for your work. The safety warnings contained here are intended to protect you from accidents that
could be caused as the result of improper use of the vacuum cleaner.
The MENZER Team
2 EN
All manuals and user guides at all-guides.com
TABLE OF CONTENTS
The user of this industrial vacuum cleaner is strongly advised to acquaint his or herself with the machine's
design, technical requirements, operating procedures for safe use, correct maintenance and repair pro-
cedures and the storage and application instructions which are described here. The user operates this
1.
machine at his or her own risk and assumes full responsibility for that operation. These instructions should
be kept and used for future reference.
2.
2.1
1. TECHNICAL SPECIFICATIONS
2.2
2.3
Model:
3.
Voltage:
3.1
Power consumption:
3.2
Volume flow:
3.3
Vacuum:
Container volume:
4.
Weight:
5.
2. SAFETY INSTRUCTIONS
5.1
5.2
The MENZER VC 760 Industrial Vacuum Cleaner has been specially designed for renovating and drywalling
6.
work, and is suitable for the removal of dry sanding dust, as well as liquids, from your surface.
7.
2.1 INSTRUCTIONS FOR POWER SAFETY
8.
• This machine may be connected ONLY to sockets that provide the operating voltage displayed on the
machine's identification label, and that are grounded in accordance with all applicable regulations.
• Do not allow the vacuum cleaner's electronics to come into contact with water, e.g. rain or other wetness
or dampness. Water that seeps in could cause the machine to short-circuit, and damage it irreparably.
Furthermore, this poses a risk of electric shocks to the operator.
• Do not roll the vacuum cleaner or other machines over the power cable, since this could cause damage
to the cable's insulation.
• Do not subject the power cable to undue strain, for example, by pulling on it to move the machine. When
disconnecting the vacuum cleaner from the power source, pull on the plug, not on the cable. Keep the
cable away from heat, oil and other chemicals.
• If the power cable is damaged, have it replaced by a trained professional. Do not attempt to use the
vacuum cleaner when there are signs of damage to the cable.
• Should you need to use an extension cable, it must have an adequate conductor cross-section (2,5 mm
to prevent voltage drop or overheating.
Version 1.4
TECHNICAL SPECIFICATIONS
SAFETY INSTRUCTIONS
Instructions for power safety
Safety in your working environment
Operating safety tips
MENZER VC 760
OPERATING THE MACHINE
230 V ~ 50 Hz / 110 V ~ 50 Hz
Starting off
1,380 W
Use in dry conditions
3,180 l/min
Use in wet conditions
20 kPa
35 l
STORAGE
10.5 kg
MAINTENANCE
Troubleshooting
Replacing the filter bag
MACHINE DETAILS
CE DECLARATION
TERMS OF GUARANTEE
EN 3
EN 3
EN 3
EN 4
EN 4
Max. connected load
(appliance socket):
EN 4
EN 4
230 V: 2,200 W (Switzerland: 1,000 W)
EN 5
110 V: 410 W
EN 5
EN 6
EN 6
EN 6
EN 6
EN 8
EN 10
EN 11
)
2
EN 3
EN 3
Publicidad
