Descargar Imprimir esta página

Menzer VC 760 Traducción Del Manual Original página 20

Ocultar thumbs Ver también para VC 760:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
1b
1c
3b
3c
5b
7b
7c
8 EN
All manuals and user guides at all-guides.com
2b
2c
4b
4c
Pull!
Press!
6b
8b
8c
Press!
4. STORAGE
The device should never be exposed to moisture. The plug connector must be removed from the socket be-
fore the machine is stored. Clean the device thoroughly after every use. Always store the industrial vacuum
cleaner out of the reach of children.
5. MAINTENANCE
Keep the air ducts and the dust collection container clean. Clean them regularly with compressed air. Wear
protective goggles when doing this. Plastic components should be cleaned with a soft and, if necessary,
slightly damp cloth. Never use solvents for cleaning the machine. Careful maintenance is essential for keep-
ing the machine functioning perfectly.
Clean the electrodes on the bottom of the reservoir cover regularly.
5.1 TROUBLESHOOTING
Problem
Possible cause
While vacuuming liquid, the ma-
The reservoir is too full.
chine simply shuts itself off.
1. Suction power is decreasing.
The filters are clogged or incor-
2. During operation, dust starts
rectly installed.
coming out of the machine.
5.2 REPLACING THE FILTER BAG
5.2 REPLACING THE FILTER BAG
To remove the filter bag – for example to exchange it, to clean it or before wet-operations – simply pull the
To remove the filter bag simply pull the filter bag off the inward facing side of the hose connection. You might
filter bag off the inward facing side of the hose connection. To fix the filter again, carefully slide its elastic
want to do this when changing it or before wet-operations for example.
rubber lip up to the approach above the emerging hose connection.
If necessary, seal the filter bag with the lug on the sleeve of the filter bag. To fix the filter bag again, carefully
slide its elastic rubber lip up to the approach above the inward facing side of the hose connection.
Then, squeeze the sides of the paper sleeves at the wings of the plug in connection.
6 EN
Correction
Empty the reservoir.
Clean or replace all filter ele-
ments and the filter bag. Also
ensure that they are correctly
installed.
EN 9

Publicidad

loading