Publicidad
Made
in
Germany
1
General information
Technical documentation contains important information
for safe operation and for retaining functional safety of
the lift.
• To verify lift set up, the assembly protocol form is to be
completed, signed and sent to the manufacturer.
• Forms are available in this inspection book for use in veri-
fying single, regular and extraordinary safety checks. Use
the forms to document inspections and leave the complet-
ed forms in the inspection book.
• The lift master forms must record changes to the con-
struction or changes to set up location.
1.1 Set up and test the lift
Safety relevant work on the lift and safety inspections may
only be done by personnel specifically trained to carry
it out. They are designated in general and in this docu-
mentation as technical experts and specialists (competent
people).
• Technical experts are people (freelance expert engi-
neers, TÜV specialists) that may inspect and assess due
to their education and experience with lifts. They are
knowledgeable in the appropriate work safety and ac-
cident prevention regulations.
• Specialists (competent people) are people who have
sufficient knowledge and experience with lifts and have
participated in a special factory training by the lifts man-
ufacturer.
1.2 Hazard information
To become aware of the hazardous points and important
information, the following three symbols are used with
the descriptive meaning. Pay particular attention to text
positions that are labelled by these symbols.
i
Note! Labels information about a key function or points
to an important remark!
Caution! identifies a warning of possible
!
system damage or other operating compa-
ny property damage if the highlighted pro-
cess is not done properly!
Danger! Identifies a danger to life
and limb, if the highlighted pro-
cess is not done properly there is a
mortal danger!
74
OPI-POWER LIFT HF 3S 3000-4000-V4.0-DE-EN-FR-ES-IT
Publicidad
