Publicidad
Made
in
Germany
• If required, firstly inform customer service.
6.2 Moving onto an obstacle
If the lifting rails or lifting arms move onto an obstacle due
to operator inattention, the lift stops in place. To remove
the object, raise the lift to a height where the object can
be removed.
7
Maintenance and care of the lift
Before maintenance, do all preparation work so there
i
is no danger to life or limb or object damage during
maintenance and repair work.
i
Legal principles: BSV (operating equipment regula-
tion) + BGR500 (Operation of work equipment).
Value is placed on long lifetimes and safety in the devel-
opment and production of Nussbaum products. To guar-
antee the safety of the operator, product reliability, low
running costs, keep the warranty and also the long-life-
time of the product, proper set up and operation is just
as important as regular maintenance and sufficient care.
Our platforms fulfil or exceed all safety standards of the
countries we supply to. For example, European regu-
lations require a service by qualified experts every 12
months of work of the platform. To guarantee the larg-
est possible availability and functional capacity of the lift
system, ensure the list of any cleaning, care and mainte-
nance work is done.
After first commissioning the lift is to be serviced at regu-
lar intervals of a maximum of one year by an authorized
person according to the following plan. For intensive op-
eration and higher degree of contamination shorten the
service interval.
The complete function of the lift is to be observed during
daily use. Customer service must be informed of any mal-
functions.
96
OPI-POWER LIFT HF 3S 3000-4000-V4.0-DE-EN-FR-ES-IT
Publicidad
