CONTROL INSTRUCTIONS
The remote control is already programmed on delivery if the remote control for some reason
communicating with the hood loses, do the following:
· Disconnect the hood from the power supply;
· Wait a few seconds and restore the power supply and within 10 seconds press the "P1" and
"PT" buttons at the same time for about 3 seconds.
The remote control is ready for operation again.
FUNCTIONS
P0: MOTOR ON/OFF button.
When selected with the engine off, the display will show a zero "0" for approximately 1 second.
P1: Motor speed decrease button, when the hood is in 1st speed, it turns off the motor.
P2: Motor speed increase button, when the hood is off it turns on 1st speed, a second press
activates 2nd speed, a third press activates 3rd speed, a fourth press activates 4th speed, on
Pressing a fifth time activates 5th speed (1st speed intensive) (**), sixth press activates 6th
speed (2nd speed intensive) (**).
The numbers of the selected speeds ("1", "2", "3", "4", "5", "6") appear on the display.
(**) Intensive speeds: The duration of the intensive speeds is 6 minutes, after which the
electronics automatically switch back to the 4th speed.
31