Descargar Imprimir esta página

Kuppersbusch DDL9830.0W Manual Del Usuario página 33

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
minutes and then returns to 4th speed).
Motor of 6th speed motor (Intense) Pink LED color (Flashes intermittently for 1 second for 6
minutes and then returns to 4th speed).
By activating the timer, the corresponding color LED flashes intermittently for 1 second
depending on the set speed, after 15 minutes the motor switches off at non-intensive speeds
and not the lighting. As for the intense speeds, with the timer enabled, it stays at the set speed
for the first 6 minutes and then finishes at 4th speed for the remaining 9 minutes.
In the Clean Air function, the light blue LED remains constant, the motor switches to 6th speed
and after 6 minutes the motor switches off and not the lights.
In the fresh air function, the blue LED will flash intermittently for 5 seconds, with the hood off,
the engine will start at 1st speed for 10 minutes, then remain off for 50 minutes, and so on until
the function is turned off.
Metal grease filter cleaning signal
After 30 hours of operation, the green LED will start flashing for 20 seconds to indicate that the
filters need cleaning. To reset the filters, with the hood off, press the "P0" button for 3 seconds
while the LED is flashing.
Longlife or ceramic filter cleaning signal
After 120 hours of operation, the red LED will start flashing for 20 seconds to indicate that the
filters need cleaning. To reset the filters, with the hood off, press the "P0" button for 3 seconds
while the LED is flashing.
Each time a button on the remote control is pressed, the cooker hood will emit an audible
signal to confirm receipt of the signal.
MAINTENANCE
WARNING! Before any cleaning or maintenance operation, disconnect the power supply to the
extractor hood by removing the cable or turning off the main switch in the apartment. Cleaning
and normal maintenance shall not be made by children without supervision.
Cleaning
The product should be cleaned regularly, both inside and out, with a cloth dampened with
lukewarm water and a neutral, non-abrasive liquid detergent.
The metallic grease filters
The filters have the task of retaining the fat particles from the cooking vapors and thus
protecting the engine. The grease filters must be cleaned depending on use and the period of
use. The filters have the task of retaining the grease particles from the cooking vapors and
thus protecting the engine. Depending on the use and the period of use, the grease filters must
be cleaned. The filters can be used in the dishwasher with short wash cycles and with
washed at low temperatures, at least every 2 months Regular cleaning of the grease filters
maintains the efficiency of the filters, prevents damage to the engine and avoids the risk of fire.
After a few washes, the filter may become discolored due to dishwasher salts and detergents.
33

Publicidad

loading