Sime MURELLE EQUIPE 220 BOX ErP Instrucciones Originales página 40

500
590
1.2.4 "MURELLE EQUIPE 550 BOX ErP" (fig. 1/c)
MURELLE EQUIPE 550 BOX ErP
500
590
NOTE: Assembly of a hydraulic separator or plate exchanger is also mandato-
ry. The hydraulic separator is supplied with modules in a kit code 8101553 and
the tubes connecting the hydraulic separator in the kit code 8101533. Fixtures
may be assembled on the left-hand side by moving the system supply/return
manifold blind flanges.
1.2.5 "MURELLE EQUIPE 660 BOX ErP" (fig. 1/d)
500
590
NOTE: Assembly of a hydraulic separator or plate exchanger is also mandato-
ry. The hydraulic separator is supplied with modules in a kit code 8101553 and
the tubes connecting the hydraulic separator in the kit code 8101533. Fixtures
may be assembled on the left-hand side by moving the system supply/return
manifold blind flanges.
40
2200
470 630 470
2830
470 630 470
3300
G
630 390
90
S3
G
FIXTURES
M System supply (Flange PN6-DN100)
R System return (Flange PN6-DN100)
G Gas (Flange PN6-DN50)
S3 Condensation drain ø 40
390
630 470
S3
FIXTURES
M System supply (Flange PN6-DN100)
R System return (Flange PN6-DN100)
G Gas (Flange PN6-DN50)
S3 Condensation drain ø 40
156
396
790
180
M
R
156
396
790
Fig. 1/c
180
M
90
R
G
156
396
790
Fig. 1/d