Pando PHM-850 Manual De Instrucciones página 94

Idiomas disponibles

INOXPAN S.L. Pando

TURNTABLE INSTALLATION

Cleaning the cooking compartment and positioning the turntable. For new installations,

ensure that all packaging and the transport belt have been removed from the turntable shaft.

Before using the oven to prepare food for the first time, the turntable must be correctly

positioned. The cooking compartment and accessories must be cleaned.

How to position the turntable:

1. Place the turntable holder (1) in the recess in the oven compartment.

2. Place the glass plate (1) on the turntable support (3). Fit the curved raised lines in the

centre of the bottom of the glass plate between the three spokes of the shaft.

3. Make sure that the glass plate (1) fits into the turntable shaft (2) in the centre of the

oven floor. The rollers of the shaft must fit inside the lower flange of the turntable.

Note:

1. Never use the oven without the turntable. Make sure that it is properly attached. The

turntable can rotate clockwise or counterclockwise.

2. Never place the glass dish upside down. The glass dish must never be restricted.

3. Both the glass dish and the turntable stand must always be used during cooking.

4. Some foods and food containers are always placed on the glass cooking plate.

5. Never restrict the movement of the turntable.

6. If the glass platen or turntable support cracks or breaks, contact the nearest authorised

service centre.