Pando PHM-850 Manual De Instrucciones página 98

INOXPAN S.L. Pando
Electrical connections
The oven is fitted with a plug and must only be connected to a properly installed earthed
socket. Only a qualified electrician who is aware of the applicable regulations may install the
socket or change the connection cable. If the socket is no longer accessible after installation,
an omnipolar switch must be provided.
with a contact gap of at least 3 mm. Protection against contact must be ensured by the
installation.
Fuse protection: see operating instructions, technical data.
CONTROL PANEL
Microwave
Function
Clock / timer
Slider
Automatic menu
Block / cancel
Start / + 30sec. / Confirm
Selection of functions
Time and time selection
Determine +/-
Automatic function selection
Lock and pause
18
EN