Bosch SCT 815 S3 Manual Original página 11

---
5. Maintenance
---Separator--- 5.1 Cleaning
Coarse workshop rags and abrasive cleaning
agents may damage the SCT 815 S3 .
Use only neutral cleaning agents and soft cloths
to clean the SCT 815 S3.
---Separator---
5.2 Spare parts
Contact your Bosch sales partner to procure the
laser range finder GLM 400 CL as a spare part.
---
Denomination
<)
Prismatic reflector
Mount for laser range finder
Line laser P-Assist S5
Positioning-foot parts set
<)
Round-magnet parts set
---Separator---
<)
Wearing part
---Separator---
5.3 Changing the positioning foot
1. Remove the defective positioning foot.
2. Use a positioning foot from the spare parts set.
3. Guide the thread of the lower part of the positioning
(3)
foot through the hole on the base plate.
(2)
4. Screw the nut onto the thread.
5. Screw the knurled screw of the positioning foot
onto the thread all the way to the stop.
6. Lock the knurled screw with the nut previously
screwed onto the thread.
2
3
(1) Knurled screw of positioning foot
(2) Nut
(3) Threaded lower part of positioning foots
---
Robert Bosch GmbH
Part number
1 685 350 018
1 680 423 012
1 690 381 124
1 687 010 599
1 687 010 644
(1)
1
5.4 Checking the screws (semi-annually)
 Check the screws on the line laser mount
(2)
base plate for a tightening torque of 4 Nm.
1 1
2 2
---
5.5 Check and calibrate laser rangefinder
The test and calibration steps are described in
the operating manual of the laser rangefinder.
---
 Check laser rangefinder for accuracy before each front
wheel calibration.
— Checking accuracy and calibrating the grade meas‐
urement.
— Accuracy check of the distance measurement.
— Checking accuracy and calibrating the target indica‐
tor (crosshairs).
---
6. Decommissioning
---Separator--- 6.1 Changing location
 If the SCT 815 S3 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
 The SCT 815 S3 is only ever to be transported in the
original or equivalent packaging.
 Heed the notes on initial commissioning.
---Separator---
6.2 Disposal
 Dismantle the SCT 815 S3 and sort out and dispose
of the different materials in accordance with the ap‐
plicable regulations.
---Separator---
7. Technical data
---Separator---
7.1 SCT 815 S3 specifications
Property
Height x width x depth dimensions
Weight
---Separator---
SCT 815 S3 | 11 | en
(1)
and the
Specification
1230 mm x 600 mm
x 510 mm
11.9 kg
1 689 989 477 | 2020-05-01