Publicidad
Idiomas disponibles
Idiomas disponibles
1.5
Safety Notes
WARNING
Severe eye damage from laser beam. Death or
severe injury.
Never look directly into the laser source.
Never point the laser beam at people, particu‐
larly at their faces or eyes.
To test function, hold an object in front of the
exit point of the laser range finder and line la‐
ser.
---Separator---
CAUTION
Risk of injury from objects falling from the
SCT 815 S3. Minor injury.
Wear safety shoes.
Always use the arrestor cable to secure the line
laser.
---Separator---
CAUTION
Risk of crushing when adjusting the height of
the prismatic reflector. Minor injury.
While the height of the prismatic reflector is
being adjusted, do not place fingers between
the tool holder and the guide tubes.
---Separator---
1.6
Other applicable documents
The brief instructions (one-pagers) can be found
in the Bosch Download Library:
www.downloads.bosch-automotive.com
---
• 1 690 386 038 – P-Assist S5 original instructions
• 2 610 050 173 – GLM 400 CL original instructions
• 1 689 989 363 – Honda brief instructions
• 1 689 989 364 – Toyota brief instructions
• 1 689 989 365 – Mazda brief instructions
• 1 689 989 366 – Kia brief instructions
• 1 689 989 367 – Hyundai brief instructions
---Separator---
2.
Product description
---Separator---
2.1
Intended use
SCT 815 S3 is an adjustment device for calibrating the
front radar sensor by the following vehicle manufactur‐
ers:
• Mazda
• Honda
• Toyota
• KIA
• Hyundai
In conjunction with diagnostic software, the front radar
sensor can be calibrated for the ACC (adaptive cruise
control) and the emergency braking assistance.
Any other use is considered improper use and is
not permissible.
---Separator---
2.2
Scope of delivery
Denomination
Base plate
Robert Bosch GmbH
Denomination
Guide tubes
Line laser mount
Tool holder for prismatic reflector
3 plastic screws
Prismatic reflector
Mount for laser range finder
Line laser P-Assist S5
Original instructions
8 hex socket head cap screws, 16 washers, 8
countersunk screws, 8 hex nuts
---
2.3
4
3
2
1
(1) Base plate
https://
(2) Tool holder for prismatic reflector
(3) Guide tubes
(4) Line laser mount
(5) Line laser P-Assist S5
(6) Prismatic reflector
(7) Mount for laser range finder
---Separator---
2.4
Resting surface of the vehicle
• Leveled
• Maximum inclination: 0.1°
• Maximum unevenness: 10 mm
---
SCT 815 S3 resting surface
• The same vertical level as the resting surface of the
vehicle
• Maximum inclination: 2°
• Maximum unevenness: 5 mm
4712008-12_shd
(1) Area where SCT 815 S3 is set up
(2) SCT 815 S3 resting surface (example)
---
Calibration environment
Order number
1 688 000 368
SCT 815 S3 overview
5
3
6
7
Prerequisites
1 m
1
Metallic objects interfere with front radar sensor
calibration.
1 689 989 477 | 2020-05-01
SCT 815 S3 | 3 | en
Order number
1 680 700 315
1 681 038 414
1 688 040 319
1 683 414 021
1 685 350 018
1 680 423 012
1 690 381 124
1 689 989 477
1 687 010 613
5 m
2
Publicidad
