Nilfisk Thor Instrucciones De Uso página 11

The machine is equipped with a specially designed cord which if damaged, must be re-
placed by a cord of the same type. This is available at authorised service centres and
dealers and must be installed by trained personnel.
Electrical connection
• Turn off the machine and unplug before starting dust bag or fi lter
change. Grasp the plug, not by pulling the cord.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed persons in
order to avoid hazard.
• Do not handle the machine with wet hands.
• Turn off the machine before unplugging. To unplug, grasp the
plug, not by pulling the cord.
• Do not carry or pull the machine by the cord.
• The machine must not be used if the cord shows any sign of
damage. Regularly inspect the cord for damage, in particular if
it has been crushed, shut in a door or run over.
Hazardous materials
Vacuuming up hazardous materials can lead to serious or even
fatal injuries.
The following materials must not be picked up by the vacuum
cleaner:
• Hazardous dust
• Hot materials (burning cigarettes, hot ash, etc.)
• Flammable, explosive, aggressive liquids (e.g. petrol, sol-
vents, acids, alkalis, etc.)
• Flammable, explosive dust (e.g. magnesium or aluminum
dust, etc.)
Service and maintenance
• Store the machine indoors and in a dry environment.
• Change the pre-fi lter with every fourth dust bag.
• Clean the machine surface with a dry cloth or a damp cloth with a little cleaning agent
• Order original accessories from a local dealer.
• For service, contact your local dealer.
8
WARNING
WARNING
Original instructions