Silvercrest SWEW 750 C4 Instrucciones De Uso página 10

Placement of the removable plates
1) Open the waffle iron by releasing the lid locking device 0 and lifting the lid .
2) Upper removable plate: First slide the lower latches 8 into the lower mount-
ings 3 .
3) Now press the upper latches 7 onto the locking devices 1, so that the
upper latches 7 spring under the locking devices 1 and the removable
plate is firmly seated .
4) Lower removable plate: First slide the rear latches 8 into the rear mountings 6 .
5) Now press the front latches 9 onto the locking devices 5 so that the
latches 9 spring under the locking devices 5 and the removable plate is
firmly seated .
6) Press firmly once in the centre of the lower removable plate to ensure that it
is securely inserted .
Extracting the removable plate
1) Upper removable plate: Slide the locking devices 1 upwards and simultane-
ously tilt the removable plate forward . Lift the removable plate out from the
lower mountings 3 .
2) Lower removable plate: Pull the locking devices 5 to the front . The removable
plate springs out a little so that you can pull it out from the rear mountings 6 .
Commissioning
Carry out the following procedure with each of the 3 pairs of removable plates .
1) Smear the non-stick coating on the removable plates with oil suitable for cooking .
WARNING! RISK OF INJURY!
► Let the appliance cool down before exchanging the removable plates!
Risk of Burns!
2) Install a pair of removable plates into the appliance .
3) Insert the plug into a mains power socket .
4) Close the appliance and lock it with the lid locking device 0 .
5) Let the appliance heat up for about 10 minutes .
NOTICE
► With the first usage a slight smell can arise (minimal smoke development is
also possible) . This is normal and dissipates after a short time . Provide for
sufficient ventilation . For example, open a window .
SWEW 750 C4 GB │ IE │ 7 ■