Publicidad
Idiomas disponibles
Idiomas disponibles
EN
22
•
The appliance may only be used with the gas bottles specified in the product
data sheet. The gas bottles used must comply with national regulations.
•
Carry out a gas leakage test with soapy water before putting the appliance
into operation.
•
When lighting the burner, the appliance cover must be open.
•
Use oven gloves and long grill utensils when using the appliance.
•
Be prepared in case of fire or accident. Know the location of the first aid kit
and fire extinguisher and familiarise yourself with their use.
•
Keep the gas hose away from hot appliance surfaces.
•
Use extreme caution when preparing food.
•
Do not heat sealed glass or metal containers in the appliance. Pressure could
build up inside the containers, causing an explosion and resulting in property
damage and/or personal injury or damage to the appliance.
•
It is recommended to wear protective gloves when using the appliance,
especially when handling hot appliance components.
GAS CONNECTION
The gas connection line between the gas pressure regulator and the grill can be
made using metal bellows or a gas-approved rubber hose with a maximum length
of 1.5 m. Gas grills that run on liquefied petroleum gas (LPG) should be connected
with a gas approved rubber hose.
•
If a rubber hose is used, a universal air inlet fitting is required.
•
The two ends of the gas hose are connected to the grill and the gas valve
respectively. Please install the rubber hose adapter directly on the main
gas pipe without any adapters in between. The diameter of the gas hose is
8-10 mm and varies depending on the adapter used. If in doubt, ask your local
gas dealer which adapter and gas hose is compatible with the gas bottles
available in your country. Never operate the device if you have any doubts
about compatibility or if you are unsure whether the connection is properly
insulated.
•
Only approved gas hoses and regulators may be connected to a (refillable) gas
cylinder. All components should comply with local regulations.
•
Make sure that the gas hose is not twisted, kinked or bent by other objects.
After installation is complete, a gas leak detection (leak test) should be
performed.
•
Do not expose the gas hose to high temperatures.
•
It is recommended that an annual air tightness test be carried out on the gas
grill.
•
Before each use, make sure the rubber hose is in good condition. Replace it if
it shows signs of wear or cracks.
Publicidad
