Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
Preparation
•
To use the barbecue, you need a liquid gas bottle and suitable gas pressure
regulators. The gas pressure regulators should comply with the current
version of the EN12864 standard and national specifications (see further
instructions).
Setting up
•
After purchasing the gas bottle, you can install it in your barbecue.
•
Make sure that the barbecue is complete and that no appliance parts are
missing. If any parts are missing, contact the customer service.
•
You will need a suitable screwdriver and spanner to assemble the appliance.
•
Select a suitable place to place the unit.
•
The appliance should be placed securely on a flat surface of sufficient size.
•
Make sure that the input and output regulators are appropriate and suitable
for the gas cylinder valve and the appliance.
•
If the gas pressure regulator is to be used outdoors, make sure that it is
protected from the environment.
•
You will need a suitable spanner to connect the gas bottle.
•
When connecting the flexible hose, make sure that it is not twisted.
Connecting a gas cylinder
•
When changing the gas bottle, make sure that there are no sources of ignition
in the vicinity.
•
Place the gas bottle on the left-hand side of the barbecue and never inside the
barbecue, as the gas bottle must be in a safe position, away from any sources
of heat.
•
When you are ready to use the barbecue, attach the gas pressure regulator to
the gas bottle and tighten it.
EN
29
Publicidad
